Every internet user demands uninterrupted access and blazing-fast internet speeds. And for the most part, many in the US get it, such as those who subscribe to deals like Cox cable Internet deals. But even the best internet services can hit snags sometimes. While this is rare, experiencing problems with your Wi-Fi signals at home is unfortunately far too common. But before you throw up your hands in despair, switch providers, or schedule a technician’s appointment, read this blog. There are several ways to boost in-home Wi-Fi access. Keep scrolling to discover what they are.
Boosting In-Home Wi-Fi Signals
Before we go on to various solutions for poor Wi-Fi signal coverage, perform this simple step. Run a speed test on a connected device, preferably one on a wired connection. Compare the speed results to the speeds advertised and billed with your current internet plan. If they don’t match, your first call should be to your service provider to fix the problem, which can often be as simple as replacing an outdated modem. However, if the speed test shows you the same speeds as advertised or billed, it could mean your internet needs now exceed your internet speeds. In this case, you may have to move to a higher-tier internet plan.
If the wired device shows acceptable speeds, try the test again, but with a wireless device this time. This should isolate the problem if it is with your Wi-Fi network. For best results, stand as close to the router as possible when you do this. Then repeat the test in different parts of your home. If the speeds elsewhere in the house are markedly lower than what you get standing next to the router, you may have flaws in your Wi-Fi coverage and signal strength. Luckily, these helpful steps can often correct the problem:
Update Your Firmware
This is often the most common cause behind a patchy Wi-Fi network. Outdated firmware can compromise the performance of your Wi-Fi router. By extension, it can affect wireless network health and consistency. Luckily, simply upgrading your router via the manufacturer’s official firmware release should fix the problem.
Place The Router in a Central Position
Sometimes the cause is as simple as having the router in the wrong spot. Wi-Fi coverage spreads out in a radius around the router. If you have it too far to one side of the house, a significant chunk of the coverage won’t even be inside your home. Having your router surrounded by thick obstacles like stone or metal walls, or even microwave or radio interference, can also cause network health to decay. Find a spot as close to the center of your home as possible for maximum in-home coverage and signal strength.
Make Sure The Router Frequency is Correct
Routers broadcast wireless signals on specific frequencies. You should check if your router is configured to the right one. If you have a dual-band router, try selecting the 5 GHz band instead of 2.4 GHz. This should offer improved throughput and optimal data transfer, taking care of any coverage issues.
Try Switching Router Channels
Signal congestion occurs when multiple routers in close proximity are broadcasting along the same channel. Most routers automatically select the best channel to broadcast Wi-Fi. But other nearby routers on the same channel can congest the signal, resulting in poor wireless internet strength. Switching channels via your router’s settings page will usually fix wi-fi signals congestion issues.
Block Unwanted Devices on Your Network
If you have a weak password, or worse, an open Wi-Fi network, the problem may not be with your hardware or firmware at all. Instead, you could have intruders connected to your network. At best, they’re just freeloading neighbors. But they can also be something more sinister, like a cybercriminal monitoring your network, stealing information, or even using your devices as tools in larger malware attacks. Neither of the two cases sounds appealing, which is why you should improve your network security. Check your router settings for a list of MAC addresses connected to your network. You can also permanently block unwanted MAC addresses here.
Buy a New Router
If nothing else works, you may have to bite the bullet and buy a new router. Technology quickly becomes obsolete, especially in the modern digital age. If you own an older router, your Wi-Fi woes could simply be a compatibility problem. Upgrading to a router that your ISP offers support for is an easy fix, although it can be a bit costly depending on what router you get.
For more information please visit: buy a proxy